<!-- ToH: {
"source": "json",
"dom": "t",
"paging": false,
"rotate": true,
"shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "owrt_forum_topic_url", "deviceid"],
"filterColumns": {"model": "^RouterStation$"}
} -->
<!-- ToH: {
"source": "json",
"dom": "t",
"paging": false,
"rotate": true,
"shownColumns": ["model", "version", "cpu", "cpumhz", "flashmb", "rammb", "wlanhardware", "wlan24ghz", "wlan50ghz", "ethernet100mports", "ethernet1gports", "modem", "usbports"],
"filterColumns": {"model": "^RouterStation$"}
} -->
<!-- ToH: {
"source": "json",
"dom": "t",
"paging": false,
"rotate": true,
"shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "firmwareoemstockurl"],
"filterColumns": {"model": "^RouterStation$"}
} -->
-> Install OpenWrt (generic explanation)
NOTE: The firmware image for the routerstation and the the one for the routerstation_pro are <color red>NOT COMPATIBLE</color>.
If you have already installed OpenWrt and like to reflash for e.g. upgrading to a new OpenWrt version you can upgrade using the mtd command line tool. It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.
http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/ LuCI Upgrade URLvia tftp mode
put RouterStation into tftp mode by holding reset button when turning it on
tftp 192.168.1.20 -m binary -c put openwrt-ar71xx-ubnt-rs-squashfs-factory.bin
run tftp command from same directory where you downloaded firmware
wait for 5 minutes and then you can reboot the router if it doesn't reboot automatically
| Architecture | MIPS |
|---|---|
| Vendor | Atheros |
| Bootloader | RedBoot |
| System-On-Chip | Atheros MIPS 24Kc |
| CPU Speed | 680 MHz |
| Flash-Chip | |
| Flash size | 16 MiB |
| RAM | 64 MiB DDR |
| Wireless | 3x 32-bit Mini-PCI slots (None included) |
| Switch | Ethernet Phy switch, ADMTEK "Infineon" ADM6996FC |
| Ethernet ports | 3x 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface with PoE on WAN |
| USB | Yes v2.0 |
| Serial | Yes |
| JTAG | Yes |
Please add pictures of this device here
For the RouterStation see http://www.ubnt.com/wiki/index.php?title=RouterStation_OpenWRT_SW_Setup_Guide#Connecting_to_RouterStation
Use 115200 N 8 1.
How to connect to JTAG interface, and how to reflash the device with JTAG tools
See port.jtag for more JTAG details.
TODO
How to add tags 